Femto-tech Crm-510 Radon Monitor User Manual

Femto-tech Crm-510 Radon Monitor User Manual

Crm-510 Femto-tech Radon Monitor (62.3% similar) In addition to the measurement and storage of radon data, the highly sophisticated on chip peripheral capabilities of the micro controller mcu used in the crm 510 provide for the measurement and storage of temperature, barometric pressure, and relative humidity. Model crm 510 is a precision. Direct indoor radon measurements were made with both a Femto-TECH, INC CRM 510 Continuous Radon Monitor and an E-Perm system. The Femto -TECH radon monitor system is based on an ionization chamber device: after filtration to remove Radon progeny associated to aerosol particles, ambient air Radon is collected and measured by means of passive.

Femto-tech Crm-510 Radon Monitor User Manual Instructions

Contact factory for details and availability.


Above prices in U.S. Dollars, F.O.B. Carlisle, Ohio, less any sales tax or duties, if applicable. Shipping and handling for commercial delivery only, residential delivery higher. Delivery higher for Canada and Mexico. All orders under $400 must be prepaid, C.O.D., or use MasterCard, Visa, Discover, or American Express. All service work, shipping and handling, and supplies must be paid for with MasterCard, Visa, Discover, American Express, C.O.D. or prepaid.

Femto-tech

Prices Subject To Change Without Notice 01/01/2018

The CRM-510LP Radon Monitor

The femto-TECH, INC. model CRM-510LP is a precision airborne alpha radiation detection instrument based on the same field proven pulsed ion chamber technology of previous models R210F and RS410F. Due to a unique patented electrometer and open grid probe design, the model CRM-510LP is highly suited for a wide range of radon measurement applications. Because of the low current requirements of the electrometer detector and on-board computer, the model CRM-510LP is truly a portable self-contained continuous radon monitor that can read and store test data for eight days of stand-alone operation. In this 'passive' mode of operation the model CRM-510LP is uniquely suited for screening and follow-up type testing.
The full function computer system incorporated in the model CRM-510LP provides the operator with a highly flexible radon detection instrument and data logger operating system, while still maintaining the simplicity of operation for which femto-TECH instruments are noted. In addition to the measurement and storage of radon data, the highly sophisticated on-chip peripheral capabilities of the micro controller (MCU) used in the CRM-510LP provide for the measurement and storage of temperature, barometric pressure, and relative humidity. This multidimensional data acquisition capability provides the tester with a unique data base for evaluating the validity of short term radon measurements.
FACT
These devices have been designed to meet the needs of Professionals who need reliable measurements, but also need additional information to assist them in interpreting results.

Sun Nuclear Radon Monitor

Femto-tech Crm-510 Radon Monitor User Manual